Jump to content

New Parts Installed


NorthGeorgiaWX

87 views

The other day I had received my new Renick catless downpipes, so I took the car down to Chequered Flag Automotive to let Chris and Shawn get those installed. While it was there, they spent lots of time tracking down a noise in the left front of the car that appeared after the first autocross. After checking and tightening everything on that side of the car, they disconnected the newly installed sway bar and methodically played with end links etc, The weird part is that the sound appears to be gone now but they never really found anything.

Each pipe has a resonator in place of the cat (4th image), and there is a H pipe (crossover pipe) that connect the two together. There are all kinds of extra bungs on the pipes in case you need to connect more sensors (wide band O2, etc). 

I pick up the car in the morning, and when I get back home I have a new tune to install to better take advantage of the lower restriction in the exhaust. It should bump me up another 25 or or so (up to 525 rwhp?) and allow the turbo's to spool a little quicker. EDIT: New tune installed. The car seems to rev a little quicker and the throttle response seems to be a little sharper. And it sounds a WHOLE lot better. 🙂

Not sure what else I really want to do to this engine right now. I may go ahead and do the Renick cold air intake worth another 20 hp to bump it up to a total of about 540 rwhp? That should be plenty. The car is still under warranty so I don't want to do anywhere close to what's been done to the other car. I will get a Boostane tune which would bump things up again due to the higher octane (102 versus 93), to ~560-570 hp. At that point I'd be good for now. If I need more power in a straight line I'll hop in the other car. 😉 Saw a dyno of another ATS-V with the IDENTICAL setup as our red V and it was making 693 rwhp and 704 ft lbs of torque on E70. Not bad for a 3.6 liter V6. 🙂


20201128_131421.thumb.jpg.4af636b35fe3e5855e17f8c3d66ca89e.jpg

20201128_131511.thumb.jpg.f4934af927b3365d748eb55ac26eb546.jpg

20201128_131517.thumb.jpg.9966f48f7f69a68474fa14917721e4f1.jpg

20201128_131438.thumb.jpg.c0b262313f69b41dc992a31ddc5f04d8.jpg 

RenickPerformanceHDownPipe_1024x1024@2x.thumb.jpg.20bd9fa215ff6859d6d06f538fbfebcc.jpg

1 Comment


Recommended Comments

I have two audio files of a cold startup, one of my car and one of the the wife's car. These were recorded at 44khz so it's CD quality if you decide to play them on a good sound system (which I recommend), otherwise they lose all the lower frequencies. I played it on mine and it sounds exactly like the car is sitting in the room. 🙂 

Driving, I like my setup better. The wife's car has a loud rasp every time it shifts, where the sound from my car is smoother. They both scream once you get on it. 🙂

This one is my 2017 with Renick DP's and stock exhaust.

2017 ATS-V.wav

The other is my wife's 2016 with NEP downpipes and Vibrant 4” resonator with custom 4” single mid pipe and stock exhaust. 

2016 ATS-V.wav

Link to comment
Guest
Add a comment...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.



×
×
  • Create New...